Shopping Cart Shopping Cart - 0 item(s) / Total: $0
Home > HERMS coils Custom coils > 1/2" Coils - Click Here

10" Coil with 2 bends 25' x 1/2" x .035 OD Tubing 304/304L (Currently out of stock)

Part Number 11A04X10252
review 4 Review(s)
5
10" Coil with 2 bends 25' x 1/2" x .035 OD Tubing 304/304L   (Currently out of stock)
10' Coil with 2 bends 25' x 1/2' x .035 OD Tubing 304/304L (Currently out of stock)
Email a friend Email a friend
Write a Review Write a Review
Price
Your Price:  
$73.00
Quantity
Add to Gift Registry
Description


This is your standard HERMS coil with 2 horizontal bends vertically inline.  Two holes are required in the side of your kettle for weldless or welded fittings.  The tubing is made out of 304/304L stainless and is measured 1/2" OD  (Outside Diameter).  The coil diameter is a 10" diameter and works great for 15-1/2" diameter kettles and up.  The horizontal bends add about 2-1/2" to the overall diameter of the coil and don't forget the space your fitting connections will take up as well. 

Using a HERMS coil eliminates the need for a burner under your mash to maintain temperature and it will also help clarify your wort.  While you mash, your wort will travel through the coil which is installed in your HLT (Hot Liquor Tank).  The HLT will be hot and ready for sparging so you can also maintain your mash temperature with this as well.  While your running your wort through your coil your also filtering giving you great clarity.  HERMS systems help increase your efficiency and get you the original gravity your trying to achieve.

That's not all a HERMS coil can do, it can also cool!  Simply fill your HLT with ice and you've creating a cooling coil!

The 10" diameter coil measures 5"-6" in height.  We recommend waiting for your coil to arrive before you drill the holes into the kettle.
























Customer Reviews
Rating Fantastic!
 
Couldn't be happier. This is the third custom stainless coil I got from these guys and they all came out perfectly. They are great to work with; highly recommended.
  Did you find this helpful?   
Reviewed by: (Verified Buyer)  from Frederick, MD. - 4/20/2019
5/5
Rating HERMS coils
 
We added this to an existing HLT with two 1/2" NPT through ports spaced at 4.5" and it works beautifully. Applying stainless compression fittings to stainless coils requires some torque for proper sealing Worked well, cleans more easily and because they don't sit on the bottom, there are no enzyme killing hot spots.
  Did you find this helpful?   
Reviewed by: (Verified Buyer)  from Raleigh, NC. - 4/7/2019
5/5
Rating HERMS coil
 
Perfectly coiled and very stout. Unfortunately, one of the ends was slightly bent which made installation using compression fitting quite difficult. I ended up cutting off both ends and using 90 degree compression X npt elbows. I got it to work but installation was much more difficult than anticipated.
  Did you find this helpful?   
Reviewed by: (Verified Buyer)  from Hudson, WI. - 11/4/2018
4/5
Rating Mr
 
Nice piece of equipment. Very well formed.
  Did you find this helpful?   
Reviewed by:  from Ithaca. - 11/29/2017
5/5
Related Items
Compression x Male Bulkhead Connector with Gasket and Washer
Compression x Male Bulkhead Connector with Gasket and Washer
Average Rating 11 Review(s)
Your Price: $13.84
1/2
1/2" Compression x 1/2" Male NPT weldless Bulkhead fitting
Average Rating 3 Review(s)
Your Price: $18.49
 
Recently Viewed Items