Shopping Cart Shopping Cart - 0 item(s) / Total: $0
Home > HERMS coils Custom coils > 1/2" Coils - Click Here

12-1/2" Coil with 2 bends 50' x 1/2" x .035 OD Tubing 304/304L HERMS (Currently out of stock)

Part Number 11A04X12502
review 4 Review(s)
4
12-1/2" Coil with 2 bends 50' x 1/2" x .035 OD Tubing 304/304L HERMS (Currently out of stock)
Coil with two additional bends
Email a friend Email a friend
Write a Review Write a Review
Price
Your Price:  
$145.00
Quantity
Add to Gift Registry
Description


This is your standard HERMS coil with 2 horizontal bends vertically inline.  Two holes are required in the side of your kettle for weldless or welded fittings.  The tubing is made out of 304/304L stainless and is measured 1/2" OD  (Outside Diameter).  The coil diameter is a 12-1/2" diameter and works great for 16-1/2" diameter kettles and up.  The horizontal bends add about 2-1/2" to the overall diameter of the coil and don't forget the space your fitting connections will take up as well. 

Using a HERMS coil eliminates the need for a burner under your mash to maintain temperature and it will also help clarify your wort.  While you mash, your wort will travel through the coil which is installed in your HLT (Hot Liquor Tank).  The HLT will be hot and ready for sparging so you can also maintain your mash temperature with this as well.  While your running your wort through your coil your also filtering giving you great clarity.  HERMS systems help increase your efficiency and get you the original gravity your trying to achieve.

That's not all a HERMS coil can do, it can also cool!  Simply fill your HLT with ice and you've creating a cooling coil!

The 12-1/2" diameter coil measures 8"-9" in height.  We recommend waiting for your coil to arrive before you drill the holes into the kettle.
























Customer Reviews
Rating Zero customer skills or service
 
Ordered this May 28, after several days of not seeing anything but the order confirmation I sent an email to ask the status, got an automated reply that they were out of the office for 2 weeks, returning June 6. Would have been nice if they had that on their website or order confirmation so you knew...June 5 got an email saying order being processed. Still hadn't seen a shipping notice by the 8th, so sent an email to ask status, later that day received shipping notice. When I went to check the FedEx site a few days later found they shipped it to my billing address, not my shipping address, which is clearly different. Never once did I get a direct reply to any of my email correspondence. The product itself looks very good, just don't expect any customer service.
  Did you find this helpful?    1 of 2 Found Helpful
Reviewed by: (Verified Buyer)  from IL. - 6/14/2018
1/5
Rating Owner
 
Very good quality and made good. It fit perfectly with only a small leak. I kept tightening and it sealed. I ran caustic cleaner through it for about 45 minutes and it did not leak and heated water in mash tub to the degree. I would buy this again if I needed to. Great price.
  Did you find this helpful?   
Reviewed by: (Verified Buyer)  from Culloden. - 1/19/2022
5/5
Rating Excellent
 
It's a work of art. Since the attachment arms are so close to the bend, there is an imperceptible loss of roundness to the ends of the tubing(at least on my coil). This was immediately noticeable when I attempted to put the compression cap and ferrules on. After foolishly attaching and reattaching the coil several(and wasting a roll of teflon tape), I simply got some hi temp o rings for the fittings, (which I should've done in the first place), and that ended my leaks immediately. This coil is an excellent piece of work and an excellent value.
  Did you find this helpful?   
Reviewed by: (Verified Buyer)  from Cottonwood, Ca. - 9/7/2017
5/5
Rating Owner
 
OUTSTANDING quality.
  Did you find this helpful?   
Reviewed by: (Verified Buyer)  from Wa. - 2/19/2016
5/5
Related Items
Compression x Male Bulkhead Connector with Gasket and Washer
Compression x Male Bulkhead Connector with Gasket and Washer
Average Rating 11 Review(s)
Your Price: $13.84
1/2
1/2" Compression x 1/2" Male NPT weldless Bulkhead fitting
Average Rating 3 Review(s)
Your Price: $18.49
 
Recently Viewed Items