Shopping Cart Shopping Cart - 0 item(s) / Total: $0
Home > HERMS coils Custom coils > 3/8" Coils - Click Here

6" Coil with 2 vertical bends 50' x 3/8" x .035 OD Tubing 304/304L HERMS/Fermentor coil (COPY)

Part Number 11A03X8502V-2
review 2 Review(s)
3
6" Coil with 2 vertical bends 50' x 3/8" x .035 OD Tubing 304/304L   HERMS/Fermentor coil    (COPY)
6' Coil with 2 vertical bends 50' x 3/8' x .035 OD Tubing 304/304L HERMS/Fermentor coil (COPY)
Email a friend Email a friend
Write a Review Write a Review
Price
Your Price:  
$94.99
Quantity
Add to Gift Registry
Description

This coil has two vertical bends going up.  This configuration is not only used for HERMS systems where brewers don't want to drill a hole in the sidewall but fermentors as well.  The coil can be submersed in a fermentor through the lid and glycol or cold water is pumped through the coil to maintain the temperature.  The tubing is made out of 304/304L stainless and is measured 3/8" OD  (Outside Diameter).  This coil has a 6" Outside Diameter and the height is made per your request.  You must note in the comment section upon checkout the overall height from bottom coil to top connections. If you would like spacing between the coils for easy cleaning, please note this in the comment section as well.  No additional comments will leave the coil compressed for shipping and customer can space coils to their requirements.

Using a HERMS coil eliminates the need for a burner under your mash to maintain temperature and it will also help clarify your wort.  While you mash, your wort will travel through the coil which is installed in your HLT (Hot Liquor Tank).  The HLT will be hot and ready for sparging so you can also maintain your mash temperature with this as well.  While your running your wort through your coil your also filtering giving you great clarity.  HERMS systems help increase your efficiency and get you the original gravity your trying to achieve.

That's not all a HERMS coil can do, it can also cool!  Simply fill your HLT with ice and you've creating a cooling coil!

The maximum overall height listed in our shopping cart is set at 20"  Coils with any additional height will require a larger box which can increase shipping costs 
























Customer Reviews
Rating Coil didnt come with specs !!!
 
I bought the 6" Coil with 2 vertical bends 50' x 3/8" x .035 OD Tubing 304/304L HERMS/Fermentor coil and specifically wrote on the comment section that i wanted certain height and spacing between coils. Well the coil was delivered without them and now i cant use it propertly. wrote a couple of emails and no answer. now its just sitting there in the corner of my brewery....
  Did you find this helpful?    1 of 2 Found Helpful
Reviewed by:  from San Diego. - 6/16/2020
1/5
Rating 6" coil
 
Wanted a coil to chill a 14g Blichmann Fermenator. Figured I'd try to get something fabricated so I could put compression fittings in the keg lid. This was delivered exactly as I had hoped. Height was as ordered, and the in and out were close enough to do what I wanted. Repeat satisfied customer.
  Did you find this helpful?    0 of 1 Found Helpful
Reviewed by: (Verified Buyer)  from Wilbraham MA. - 7/23/2017
5/5
Related Items
Compression x Male Bulkhead Connector with Gasket and Washer
Compression x Male Bulkhead Connector with Gasket and Washer
Average Rating 11 Review(s)
Your Price: $13.84
1/2
1/2" Compression x 1/2" Male NPT weldless Bulkhead fitting
Average Rating 3 Review(s)
Your Price: $18.49
 
Recently Viewed Items