SS Comp x MPT Bore Through

Love this 'bore through' design. Allows for some wiggle room when assembling. I did replace the stainless sleeve with a couple of o-rings, so now I can finger tighten and still get a good adjustable seal. Great customer service, price and fast shipping. Thank you!

5/5

The design is great and works awesome with T18004 180 Degree Tube Bend in my kettle. simple and easy to use!

5/5

I have bought many of these items in the last two years. They work perfectly for my adjustable racking cane in my sanke fermenter, my HERMS coil install, in my adjustable sparge arm, etc... They allow you to adjust stainless tubing on the fly to your own needs! Great design!! If you are using these under pressure please use the stainless compression rings which come with it, as the vitron or buna-n o-rings will not hold pressure.

5/5

I bought this to build an inline oxygenator with their aeration wand and the shaft of the aeration wand is 3/16 not 1/4. So now I need to buy a different aeration wand or find someone that makes a 3/16 compression fitting. Not SB's fault however it is unfortunate. I would suggest SB carries an appropriate compression bore through.

4/5

The bore through design is absolutely the best way to go. I bought a few of these and a few of the non-bore through, and basically ended up buying more bore through to replace the others. Even if you don't need it to pass through the whole thing it still solves issues that come with compression fittings

5/5